Industrial safety equipment manufacturer · Qinhuangdao, China

Solar PV mounting fall protection: anchors, gear, supervision

Solar mounting installation happens above 2 metres almost by definition. The questions that decide whether the fall protection actually works: what counts as work at height, where an anchor may go, and how one attendant follows a dozen scattered work faces.

Most solar PV mounting installation takes place on rooftops and arrays above two metres, so fall protection has to solve three things at once: anchor points, equipment, and supervision. Yunku Technology breaks the usage of a work-at-height smart safety harness down by three types of work face.

Does mounting installation count as work at height?

The test is the height of the surface the worker stands on, not how high the panels end up. Under GB/T 3608-2008, Classification of work at height, any job with a fall height of 2 metres or more counts: sheet laying on the roof and fastening on the upper structure both qualify, while assembling low ground-level sections does not. Do not judge risk by panel height — once a worker steps onto purlins or the roof edge, the reference plane is already past the line.

Choosing the anchor point and matching the gear

PV mounting rails are designed to carry modules, not to catch a falling worker — clipping a rope to a rail is anchoring to thin sheet. Anchor to roof structural beams or certified anchor points first.

Where workers climb ladders or change height frequently, GB 23468-2025 clause 4.3.5.3 calls for a guided-type fall arrester or a retractable-type fall arrester as the priority. The harness body should be a full-body Class Z fall-arrest harness; under GB 6095-2021 the combined body weight and carried load must not exceed 100 kg, and heavier users need a separate assessment.

A dozen faces at once: how one attendant keeps up

One crew often opens a dozen work faces at the same time, and an attendant cannot watch them all: an unclipped hook or a low-anchor-high-tie looks no different from normal work at fifty metres. The practical answer is to add a monitor to the harness. The Yunku multi-state harness monitor (SBM3000 series) mounts on the existing harness without touching load-bearing parts, enters supervision mode automatically by height, recognises unclipped, low-anchor-high-tie, silent and suspended states, and buzzes on the spot; records go to the management platform over 4G, and on remote plants with weak signal, local detection and alarms keep working.

What to ask a supplier for PV projects. Whether the monitor holds its height calibration as the crew moves between roof sections, how records export against the daily permit, and which standard the harness body is certified to — GB 6095 for projects inside China, EN 361 or ANSI Z359 where the destination market requires it.

Tell us your site conditions — we will size the system for you

Share your industry, the work-at-height, confined-space or perimeter-control tasks involved, and any applicable standard you must comply with. Our engineering team will come back with a configuration and a budget range.