Industrial safety equipment manufacturer · Qinhuangdao, China

Ship enclosed spaces: CO2 joins the five-gas pre-entry test

The pre-entry atmosphere test for enclosed spaces is expanding from four gases to five, with carbon dioxide now mandatory. The configuration advice: verify detection parameters, certificates and sampling method first — a full replacement is usually not necessary.

With IMO resolution MSC.581(110) in force, the mandatory pre-entry test for enclosed spaces expands from oxygen, flammable gas, carbon monoxide and hydrogen sulphide to five gases, with carbon dioxide added as a required reading. Yunku Technology's advice for ship confined space monitoring equipment: check the parameters first, then certificates and sampling method.

Why a four-gas detector is no longer enough

Traditional tank-entry checks watch four parameters: oxygen (acceptable range 19.5%-23.5%), flammable gas (below 1% of the lower explosive limit), carbon monoxide and hydrogen sulphide. Cargo residue fermentation and firefighting-system leaks both let carbon dioxide accumulate in the bilge, and a four-gas test misses that suffocation risk. MSC.1/Circ.1477 also requires the pre-entry detector to have remote sampling capability — a diffusion sensor worn on the body cannot substitute for it.

Which compartments are tested to five parameters

Cargo holds, ballast tanks, fuel tanks, sewage tanks, pump rooms, machinery-space bilges, double bottoms and cofferdams are all enclosed spaces that must show five-parameter readings before entry; ships carrying gas-generating cargoes need additional portable detectors matched to the vessel type. GB/T 40531.1-2021 sets the corresponding performance, alarm-grading and protection requirements for marine portable gas detectors, so selection can go straight off the table.

Does the equipment need replacing? Four checks first

First, detection channels: can the existing unit be extended with a CO2 parameter? Have the manufacturer confirm channels and range in writing before any retrofit — the gas-detection module of the Yunku LSM3000 series confined space monitoring station supports extending detection parameters by industry. Second, class certification: portable units need a CCS marine product certificate; equipment without complete certification does not go on board. Third, sampling: a pump type with an extension tube reaches the dead corners at the bottom of a tank, while a diffusion type only reads around the sensor. Fourth, records: pre-entry readings and continuous in-work logging must be exportable by voyage, so they match the permit during marine inspections.

About Yunku Technology. Yunku Technology provides confined space monitoring station solutions for shipbuilding, repair and alongside maintenance, linking detection, attendance and access control in one chain, with detection parameters extendable as class requirements evolve.

Tell us your site conditions — we will size the system for you

Share your industry, the work-at-height, confined-space or perimeter-control tasks involved, and any applicable standard you must comply with. Our engineering team will come back with a configuration and a budget range.