Municipal drainage desilting and inspection-well maintenance are listed as confined space risk-inspection priorities by many provinces and cities, and the regulatory line is that they are routine: entry permits, detection records, an attendant on duty. Configure the work as occasional and you get verbal permits, nose-based gas checks and supervision by shouting. Treated as recurring operations, every well needs detection, access control and data records — no picking and choosing.
One well, one set of equipment? Crews do not work that way
A municipal crew may open five or six wells a day, scattered along the pipeline. Park the equipment at one wellhead and every other well falls back to manual watching. The workable setup is one mobile kit per crew: the confined space monitoring station splits into an external unit at the entrance of the day's well and an internal unit that moves down with the work face, together with a gas detection ball; workers clock in and out with smart wristbands; when the crew moves on, the whole kit travels with the vehicle, and detection and access records are filed per well.
Continuous monitoring, not a single pre-entry reading
Hydrogen sulphide is heavier than air, sinks to the well bottom, and its concentration swings again once clearing stirs it up, so monitoring must be continuous during work. GB 46768-2025 sets explicit requirements for real-time monitoring and records during work, with oxygen alarm limits at 19.5% and 23.5%. Keep a full detection and access record for every well — pull up the curve at inspection instead of flipping through paper forms.
The check worth doing. Take one crew's day: five wells, two relocations, one lunch break. If detection and access records exist for every well and can be pulled by curve, the crew is genuinely managed as recurring operations; if the records live in one paper logbook, the equipment is decoration.