Yunku Industrial Safety

On the construction site, high altitude work, overlapping and cross work is very much. In order to prevent the operator from falling at a certain height and position, the operator must wear a safety harness when working at heights. Many construction workers feel trouble of fastening safety harness, smart safety harness monitor can achieve effective safety management of the construction site.

The use and maintenance of safety harness have the following requirements:

(1) Before using the safety harness, check whether the rope has deterioration, whether the clamp ring has cracks, and whether the spring bounce is good.

(2) If the safety harness without a fixed hanging place, we should use the appropriate strength of the wire rope or other methods. It is forbidden to hang a safety harness on a moving, sharp or unstable object.

(3) High hanging but low using. When the safety harness is hanging high and workers are working below, it is called high hanging but low using. This is a relatively safe and reasonable scientific tie method. It can reduce the actual impact distance when there is a fall. The opposite is to hanging low but using high. It's when the safety harness is low hanging and the man is working high. This is a very unsafe tie method, because when the fall occurs, the actual impact distance will increase, and the workers and the rope will be subjected to a larger impact load. Therefore, the safety harness must be high hanging and low using.

(4) The safety harness should be tied to a strong component or object, to prevent swing or collision, the rope can not be knotted, and the carabiners should be hung on the connection ring.

(5) The safety harness protective cover should be kept intact to prevent the rope from being worn. If the protective cover is found damaged or fell off, a new cover must be equipped before use.

(6) The safety harness is strictly forbidden to elongate without authorization. If using 3m or more long rope must have a buffer, any part must not be arbitrarily removed.

(7) Before using the safety harness, check whether all parts are intact. The safety harness should be maintained and kept after use. It is necessary to check the sewing part and carabiners of the safety harness frequently, and it is necessary to check in detail whether the twisting thread is broken and damaged.

(8) The safety harness should be properly kept when not in use, and should not be exposed to high temperature, open flame, strong acid, strong alkali or sharp objects, and should not be stored in a damp warehouse.

(9) The safety harness should be tested after two years of use, and the appearance inspection should be carried out frequently. If any abnormal condition be found, the safety harness must be replaced immediately. Safety harness that have been used in regular or sample shall can not be used again.

Hebei Yunku high-altitude operation monitoring devices - smart safety harness monitor can realize the alarm of abnormal wearing status of safety harness, including without wearing the safety belt, low hanging but high using, double carabiners hanging too close, also supports the work leader/guardian receive remote safety alarm reminder, effectively reduce the safety risk of high-altitude operations. The smart safety harness monitor can realize the high-altitude operation can be known in advance, controllable in the event, and traceable afterwards.