Yunku Industrial Safety

Before using the smart safety harness, wear the harness and check the quality of the harness to ensure safe use. Observe whether the nylon belt has broken threads and obvious scratches, whether the metal hook has obvious cracks, and whether the hook locking device is intact and usable.

Wearing the safety harness correctly: First fasten the chest strap of the safety harness, then pull it tight, the waist buckle assembly must also be fastened. Finally, fasten the leg straps of the safety harness. When fastening the leg straps, they should be kept moderately loose. The status is monitored in real time by the smart safety harness monitoring system to improve the safety of the operator.

Hang the safety harness in the proper position: When hanging the safety harness, adopt the method of hanging high and using low, and prevent swinging and collision, avoid sharp substances, and do not contact with open flames. After selecting the hanging position, make sure that the metal pin is locked. The smart safety harness monitoring system will indicate wearing abnormalities through alarms and correct them in time.

Firmly fasten the hook and loop of the smart safety harness to the tether point: When working at height, the hook and loop of the safety harness need to be firmly fastened to the tether point. The rope can't be knotted and the hook and loop can't be moved at will. When the operation is not proper, the device will remind to correct it in time through sound and light alarms to avoid unnecessary safety accidents.